True-Flo Anti Wear Hydraulic Oils

Anti Wear Hydraulic Oils
Non-conductive in All Grades

True-Flo AW Hydraulic Oils are general purpose fluids blended with anti wear , rust and oxidation additives for use in closed-loop hydraulic systems and for hydraulic only systems in farm, logging and construction equipment. These oils are blended from specially selected hydrotreated base oils chosen for their clarity, purity, color and resistance to oxidation. An OEM approved additive system is employed to impart maximum performance in hydraulic system applications.

True-Flo AW Hydraulic oils are recommended in hydraulic equipment operating under normal to moderate pressures and requiring an anti-wear hydraulic fluid. May also be used in circulating oil systems protecting gears or other moving parts. Available in six grades from very thin to heavy.

R & O Hydraulic Fluid

Non-conductive in All Grades

True-Flo R&O Hydraulic Fluid is a blend of highly refined base stocks additized with rust, oxidation foam inhibitors for use in industrial general purpose applications calling for normal to moderate service. This fluid can be used in old and new equipment where Anti-Wear properties are not required. Excellent low temperature properties for use in cold climates

• Hydraulic Systems on Industrial and Farm Equipment
• Circulating Oil requirements
• Gear Oils without EP requirements
• Provides a lubricant hydrodynamic film for protection against rust and corrosion.
• Conditions and protects seals from leakage.
• Resists air entrainment and foaming.
• Effective as a heat transfer fluid.

Xtreme Extended Life ISO Hyd. Oil

Non-conductive in All Grades

Xtreme Extended Life ISO hydraulic oils are blends of anti-wear, rust and oxidation inhibiting additives in highly refined paraffinic base stocks. These blends give wear protection, thermal and hydrolytic stability, corrosion protection, foam inhibition and demulsibility properties, plus long oxidation life in high temperature applications. Recommended for use in high-pressure hydraulic systems where long oil life and anti-wear protection is critical. Typical oxidation life of 5,000 hours.